I'm game

One of the bolts that attached the original AFM to the original air cleaner housing

Sorry if it's been asked before: the 3D printed tools can be used on other vehicle belts correct?

What are you pointing at?

What happens if you remove the passenger side jumper that seemed to cause the dash light to come on? If the light then goes back out, I could only guess you are bridging the wrong terminals somehow. If it stays on, then there's got to be a break in the tree lights somewhere else.


Not sure ...

I just did a cluster refurb over the winter.
LEDs from superbrightled.com
3D printed rings from Tom
SEM satin black paint

I tried to refurb the reflectors, but I don't think it worked so well... we'll see.

https://carpokes.com/viewtopic.php?t=4657


Wow... niceeee

I like that you put the ...

What happens if you remove the passenger side jumper that seemed to cause the dash light to come on? If the light then goes back out, I could only guess you are bridging the wrong terminals somehow. If it stays on, then there's got to be a break in the tree lights somewhere else.


Not sure how I ...

All this time you could have just pulled the cluster and removed the bulb :)


If I pull the cluster, might as well replace all the bulbs. I should then repair / refinish the reflector. Fix the odometer. Remove the plastic window and refinish the spotted face. Good time to get Tom's gauge ...

Ahh now I get it

Even though ABS is available by 1987, my car does not have that option

What confused me was my "barrel" connector isn't a barrel like ABS cars; it's a flat 2-input receptacle

Now I understand that the long middle section of the wiring loom has five wires because they use that ...

Ok I'm confused 😂

I feel we are confusing terms

Here are the harnesses:

IMG_8830_Original.jpeg

And here is what I am calling the sensor wire:

IMG_2297_Original.jpeg

I have removed all the wire up to the harness. The wire had connections at the strut and on the body behind the strut

Starts ...

...and out of the plug is a ground wire attached nearby...