Track car prep
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
Paint has been sprayed!
- Add Pictures/Files
-
- F03329D0-8E79-4F9A-9357-9D2AA8FB5F28.jpeg (2.65 MiB) Viewed 896 times
-
- 0D394A52-4F19-4746-8E7B-87EC76484F2F.jpeg (2.76 MiB) Viewed 896 times
-
- A64E7EE6-D947-48B8-AD35-34BD38B11C6D.jpeg (3.19 MiB) Viewed 896 times
-
- C12BCAAE-734B-4C77-8BB9-825E4957307F.jpeg (2.78 MiB) Viewed 896 times
-
- A0F96BD3-2409-4C34-A54F-60F645D51B38.jpeg (3.17 MiB) Viewed 896 times
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
I have seen that done a number of time. Once you are in front of the shock towers there is not much added chassis stiffness so you can end the frame rails there if you want.Thom wrote: Fri Jan 06, 2023 8:14 am Did you ever experience the front members each living a life of its own when cutting the front cross brace?
-
Tom
- Site Admin
- Posts: 8581
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 893 times
- Been thanked: 3854 times
- Contact:
Very cool pictures. What did you paint it with? I suppose the beauty of a race car is that you can always add structural bracing and cross-members as needed wherever they fit....
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
its called 'Delfleet Essential' PPG paint. its an epoxy paint designed for 'fleet' use. Meaning that its very tough and affordable! I have used it before and its a very hard finish....but you need to cover everything in a 2 mile radius - it sticks to everything and dries as hard as hell!Tom wrote: Fri Jan 06, 2023 10:06 am Very cool pictures. What did you paint it with? I suppose the beauty of a race car is that you can always add structural bracing and cross-members as needed wherever they fit....
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
Some more pics if stuff that no one else will ever see….but I know what it looks like!
- Add Pictures/Files
-
- 1D1D2C1D-1A21-4EF6-ACB1-6160FDC8C33E.jpeg (2.61 MiB) Viewed 840 times
-
- 5B9680C7-B706-49FD-AF00-481253533790.jpeg (2.68 MiB) Viewed 840 times
-
- 0283E754-803A-4B26-95D3-D857E252BFAE.jpeg (2.95 MiB) Viewed 840 times
-
- 4AFEBF1F-91DD-45CD-A345-AD2037A36D7C.jpeg (4.03 MiB) Viewed 840 times
-
- 3E67CC64-A1EB-4601-BB23-AC6C71DE4AF6.jpeg (2.84 MiB) Viewed 840 times
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
nice tip from this project - Home Depot has 'generic' tyvek 9' x 150' for about $100. Great to build a temp paint booth by taping it to the ceiling around the car. The Delfleet Essential 2k epoxy paint has a hell of an overspray that is sticky as hell. For a couple of hours after the spray you could hear you shoes sticking to the floor!
-
chris white
- Posts: 426
- Joined: Wed Aug 11, 2021 11:40 am
- Been thanked: 167 times
A lot of brackets, tabs, studs and stuff were removed before paint. amazing how many things were added by Porsche. Probably took of 20lbs in not needed attachment hardware.ROB III wrote: Fri Jan 06, 2023 8:53 am Thanks for the shots with paint...good clear views of interior minus ALL trim and sound deadening....useful for future reference.