My 718 Project Log: Interior & Exterior Mods

[71eh]

I decided to turn this thread into a project log for some of the modifications I am doing. I started with the biggest project, the clear engine cover with GT4RS style OIL/WATER cover.... I am planning on doing a bunch of interior mods now which I will update. Click below to take you to the newest addition, or whatever one you are interested in.

Happy to answer any questions about any of my mods, as some are custom made.

I will be updating THIS post with completed projects. So far we have....

1) Carbon'ize the Strut Bar - viewtopic.php?p=32317#p32317

2) Clear Engine Cover + GT4rs style OIL/WATER Cover viewtopic.php?p=32501#p32501

3) | GT4rs PDK Shifter Conversion, with EdGuards Stitch & Embroidery! viewtopic.php?p=33451#p33451

4) | Custom "718" Engraved Magsafe Phone Mount! viewtopic.php?p=33466#p33466

5) | Carbon Fiber inner door sills viewtopic.php?p=33492#p33492

6) NEW | Sports Chrono Housing | viewtopic.php?p=34731#p34731

7) NEW | Illuminated Carbon Door Sills (Switch from Stainless) viewtopic.php?p=35017#p35017

8) NEW | Alcantara Steering Colum Casing + Chalk Stitching (Project with Exclusive Option ) viewtopic.php?p=35164#p35164

10) NEW | Custom Made by @Crazy Eddie | French Stitch Fuse Covers + Alcantara Dash Ends! viewtopic.php?p=38245#p38245

11) NEW | De-Chrome the Air Vent Rings viewtopic.php?p=39529#p39529

----------------------------------------------------

Project 1: Carbon'ize the Strut Bar

Blue and White Modern Education Technology Twitter Header.png (326.12 KiB) Viewed 4963 times

This is by far the simplest part of this project. Take off the top trim pieces (where the seatbelt comes out of), and unscrew the strut bar. That's it. Done.

I had 2 options. Option 1: Buy a $500 to $1,000 carbon strut bar from a place like DBcarbon... Option 2: Buy $15 bucks worth of high quality 3m vinyl from a wrap shop and do it myself....

I picked option 2

Before:

IMG_6275.JPG (3.94 MiB) Viewed 5702 times

After:

Picture1.png (16.5 MiB) Viewed 5702 times

[Larry C]

Very nice. Where did the carbon fiber strut bar come from?

[71eh]

Very nice. Where did the carbon fiber strut fiber come from?

Well I could have spent $500 to $1,000 on a carbon fiber strut bar from DBcarbon etc. But instead, I bought some high quality carbon vinyl from a wrap shop for $15 bucks, and did it myself lol. Really took my time.

[WillyDaP]

Way to keep your carbon footprint at a lower cost, ha,ha!

[J-Dub]

Looks great! Nice work. Looking forward to what else you come up with.

Jeremy

[718-4Me]

I chose to not only the oil, water cover a la GT4RS, but the strut bar also. You did a great job. Also added CF to the dash and center console.

[71eh]

I chose to not only the oil, water cover a la GT4RS, but the strut bar also. You did a great job. Also added CF to the dash and center console.

Hey, nice! I ordered the same oil/water cover as yours, should be here Monday. It looks really nice there!

[71eh]

Project 2: Clear Engine Cover + GT4rs Style OIL/WATER Cover

Blue and White Modern Education Technology Twitter Header (1).png (324.12 KiB) Viewed 4961 times

Some common questions...

Noise: hardly any increase in engine noise. Just an increase in induction sounds. You also hear tiny little things an engine does that is always hidden from sound dampening. No drone. On the highway, I would say there is no change in sound at all.

It has numerous rubber/foam gaskets, and every single edge has a rubber gasket on it. Very well engineered.

Mount, Lighting, Rubber Gasket, GT4rs style Oil/Water cover trim, Clear Engine Cover!

Step 1: Take off the Engine Cover.

IMG_6308.JPG (2.81 MiB) Viewed 5453 times

Step 2: Install the Engine Cover mounting hardware, and lighting (so its connected to the rear trunk lights) and Gold Engine Line Shrouds (for looks mostly, I know I don't need heat protection ha).

IMG_6321.JPG (3.03 MiB) Viewed 5453 times

Step 3: Put it ALL back together with the new GT4rs style oil/water cover.

IMG_E6348.JPG (2.42 MiB) Viewed 5453 times

IMG_E6349.JPG (4.25 MiB) Viewed 5453 times

IMG_E6350.JPG (4.85 MiB) Viewed 5453 times

[718-4Me]

UPDATE: It's nearing completion! I have Tom making me up a cool mount I can put on the Airbox for a Porsche Crest. That will be the next update

Some common questions...

Noise: hardly any increase in engine noise. Just an increase in induction sounds. You also hear tiny little things an engine does that is always hidden from sound dampening. No drone. On the highway, I would say there is no change in sound at all.

It has numerous rubber/foam gaskets, and every single edge has a rubber gasket on it. Very well engineered.

Mount, Lighting, Rubber Gasket, GT4rs style Oil/Water cover trim, Clear Engine Cover!

Step 1: Take off the Engine Cover.

IMG_6308.JPG


Step 2: Install the Engine Cover mounting hardware, and lighting (so its connected to the rear trunk lights) and Gold Engine Line Shrouds (for looks mostly, I know I don't need heat protection ha).

IMG_6321.JPG


Step 3: Put it ALL back together with the new GT4rs style oil/water cover.



IMG_E6348.JPG

IMG_E6349.JPG

IMG_E6350.JPG

Where did you get the CF oil and water caps, never seen them before?

[71eh]

UPDATE: It's nearing completion! I have Tom making me up a cool mount I can put on the Airbox for a Porsche Crest. That will be the next update

Some common questions...

Noise: hardly any increase in engine noise. Just an increase in induction sounds. You also hear tiny little things an engine does that is always hidden from sound dampening. No drone. On the highway, I would say there is no change in sound at all.

It has numerous rubber/foam gaskets, and every single edge has a rubber gasket on it. Very well engineered.

Mount, Lighting, Rubber Gasket, GT4rs style Oil/Water cover trim, Clear Engine Cover!

Step 1: Take off the Engine Cover.

IMG_6308.JPG


Step 2: Install the Engine Cover mounting hardware, and lighting (so its connected to the rear trunk lights) and Gold Engine Line Shrouds (for looks mostly, I know I don't need heat protection ha).

IMG_6321.JPG


Step 3: Put it ALL back together with the new GT4rs style oil/water cover.



IMG_E6348.JPG

IMG_E6349.JPG

IMG_E6350.JPG

Where did you get the CF oil and water caps, never seen them before?

I made them. I got vinyl stickers made (Porsche and Oil/Water), then 3m'ed the disks on the plastic caps. Perfect fit.