LN Spin On Oil FilterAdapter

Including Spyders & GT4s
User avatar
aboyandhisdog
Posts: 136
Joined: Thu Nov 24, 2022 7:38 pm
Has thanked: 131 times
Been thanked: 51 times
But there are a bunch of filters to choose from that fit. Go on Rock Auto and search for a 2006 Corvette (that is one vehicle that uses the filters that are for the LN Porsche adaptor) and a lot comes up to choose from. They have the Wix, Mahle, Mann, Hastings, Bosch, LuberFiner, and a bunch more. And you can view the hole array that LN was referring to and see which ones fill the bill. Good luck!
Last edited by aboyandhisdog on Mon Feb 26, 2024 6:42 am, edited 2 times in total.
-Tom
Fort Collins, Colorado
997 C2, 2006

Image

#11

User avatar
Bill in Bama
Posts: 517
Joined: Tue Aug 31, 2021 7:09 am
Location: Fort Payne, AL
Has thanked: 16 times
Been thanked: 155 times
That is a disturbing development, but LN is on top of it and there are other brands that fit as well. Contact LN Engineering and they can advise you. I used their adapter on my 987 and my 981, still have the latter adapter but sold the car.
'21 718 GTS 4.0, AGM/Espresso/ Cognac
'17 Cayenne base, White/Luxor/Black
'16 Cayman GTS, great car, sold for the 4.0
'13 Cayenne base, DBM/Luxor beige
'06 Cayman S, first mid-engine car
'86 944 Turbo, fast! Stone grey
'84 944, my first Porsche DBM

#12

cavediver32043
Posts: 9
Joined: Tue Sep 06, 2022 10:05 am
Has thanked: 14 times
Been thanked: 10 times
No regrets. I use a WIX spin on high flow 51042 vs the now made in China NAPA 1042 (which has visibly smaller flow hole diameter, Not Good!). My oil change intervals are 4500 mi. on average. I pull and send off UOA samples to Blackstone every other oil change cycle. Samples have been fantastic, below the norm. Also use a Magnetic Drain Plug: if you have metal in your oil that would b visible in your filter it will b seen. I dont worry about cutting my filters. Just me and what works for me! Happy Motoring!

#13

friendly1
Posts: 1
Joined: Sat Apr 13, 2024 9:48 am
Been thanked: 1 time
I just installed the LN adapter on my 2016 Boxster 2.7. It is well made. Installation is straight forward. I did not prefill the filter as the instructtions said not to, but then got a warning from my 'electronic dipstick' to add more oil. It seems odd to replace the canister with such a tiny filter cartridge but I already change oil every 5k miles and this should be much less expensive and easier from now on.

#14

User avatar
GIjoe6289
Posts: 2
Joined: Sun Jun 02, 2024 5:36 pm
Location: Forestville NY
Been thanked: 4 times
Fitted the LN adapter to my 09 Boxster S and torqued to 18 lbs ft. Purchased WIX filters from Rock Auto. Sure will make filter changes much easier.

#15

boxstermike06
Posts: 16
Joined: Sat Aug 19, 2023 6:17 am
Has thanked: 1 time
Been thanked: 2 times
Have it - like it- I was told it also solves a by pass issue on older engines.

#16

User avatar
Bill in Bama
Posts: 517
Joined: Tue Aug 31, 2021 7:09 am
Location: Fort Payne, AL
Has thanked: 16 times
Been thanked: 155 times
I have a lightly used one on the classifieds section should anyone be looking for one.
'21 718 GTS 4.0, AGM/Espresso/ Cognac
'17 Cayenne base, White/Luxor/Black
'16 Cayman GTS, great car, sold for the 4.0
'13 Cayenne base, DBM/Luxor beige
'06 Cayman S, first mid-engine car
'86 944 Turbo, fast! Stone grey
'84 944, my first Porsche DBM

#17

User avatar
rjh
Posts: 9
Joined: Wed Jan 05, 2022 8:06 am
Been thanked: 2 times
Here is a quick update: I installed the adapter and oil filter Dec 2023. Has been working flawless since. I post another update after I do the next oil change in Dec 2024.

#18

User avatar
John17
Posts: 25
Joined: Thu Feb 16, 2023 7:56 am
Has thanked: 50 times
Been thanked: 8 times
ChrisS819 wrote: Fri Feb 23, 2024 3:27 pm I was going to install one on my 987.2 until I read the article from Ln engineering about how Napa oil filters are being made in China.
...which is why you take the above advice and get an equivalent Bosch or Mahle! There is usually a cross-reference device or book at most parts stores. Or do as suggested and just ask for a 06 Corvette filter.
Not an issue.

#19

cavediver32043
Posts: 9
Joined: Tue Sep 06, 2022 10:05 am
Has thanked: 14 times
Been thanked: 10 times
ChrisS819 wrote: Fri Feb 23, 2024 3:27 pm I was going to install one on my 987.2 until I read the article from Ln engineering about how Napa oil filters are being made in China.
Yes, the Chinese NAPA 1042 filters are not good, reduced flow. The Filter to use with the LN Spin on Adaptor is the WIX 51042. LN Engineering concurs.

#20

Post Reply