SNEAK PEEK - 718 SPORTS CHRONO BEZEL COVER

[blueline]

This is the 3M product we discussed last year for emblem replacement and other. Tom, as I recall, you were going to give it a try on something other than bezels which were not part of that discussion. However, it it might be perfect for them.

https://a.co/d/hG5WNEn

610bH6++l+L._SL1500_ (Small).jpg (15.9 KiB) Viewed 1806 times

[Robertsmania]

I might be a little confused, but I got really excited when I found this video:


We just purchased a 2025 718 Cayman and I find the windshield reflection of the glare from the chrome sports chrono bezel to be very distracting. My goal would be a black cover like we see here, not a flashy color.

I guess I'm a little sad to read in this thread that the project stalled? It looks great in the video!

Is there a version available, or would you be willing to share the files from as far as you got @Tom ?

[Tom]

I kind of forgot about that version -- it was be best of the many many versions I tried, but ultimately it wasn't as robust as I wanted to make it an official product. Once you start charging for things, people tend to expect a perfectly polished product, and I was worried that this one would not be well received by too many people. I'll see if I can find the file though. I also did this video for people who want to remove the factory bezel and just paint it...

[Robertsmania]

Thank you!

My son works with 3D printing a lot and I’m optimistic that file would be a great starting point.

That disassembly video is very helpful, but I would prefer a less drastic solution.

[Robertsmania]

Looking around, I do find some options on eBay which all seem to be aluminum covers. Black, red and blue are the color options I see.

Screenshot 2025-07-16 at 5.12.33 PM.png (1.83 MiB) Viewed 1403 times

Screenshot 2025-07-16 at 5.12.14 PM.png (2.53 MiB) Viewed 1403 times

But I would still prefer to do some experiments printing my own.

@Tom do you have any .stl files you would share that at least have reasonably good dimensions for the bezel?

[Bob Z]

I have several variations of these from when we were experimenting with different sizes so if someone is interested message me. I no longer have my 718 Spyder and they will not work on my 992 TTS Cab.

[Tom]

I have several variations of these from when we were experimenting with different sizes so if someone is interested message me. I no longer have my 718 Spyder and they will not work on my 992 TTS Cab.

Bob, if memory serves, I sent you replica bezels you could on;y install after removing the factory bezel, right? '

I'll see what I can find in terms of the clip on style....

[Tom]

Looking around, I do find some options on eBay which all seem to be aluminum covers. Black, red and blue are the color options I see.

Screenshot 2025-07-16 at 5.12.33 PM.png
Screenshot 2025-07-16 at 5.12.14 PM.png

But I would still prefer to do some experiments printing my own.

@Tom do you have any .stl files you would share that at least have reasonably good dimensions for the bezel?

I will look to see what I have. If you don't mind using glue or tape, I'm sure one of the ones I made would work.

[Bob Z]

I have several variations of these from when we were experimenting with different sizes so if someone is interested message me. I no longer have my 718 Spyder and they will not work on my 992 TTS Cab.

Bob, if memory serves, I sent you replica bezels you could on;y install after removing the factory bezel, right? '

I'll see what I can find in terms of the clip on style....

I think you may be correct, Tom. Since I no longer have my Spyder I cannot try them out though.

[Larry C]

A few years ago I purchased several of the eBay aluminum bezel options. They were all bulky and looked cartoonish.