Request for STL file : Porsche 968 End Cap for Rear Wiper

Post Reply
User avatar
rwodabek
Posts: 2
Joined: Tue Dec 30, 2025 11:06 am
Has thanked: 1 time
Hello all,
I'm wondering if anyone has found or created an STL file for the end cap for the rear wiper on the 968. I've checked around and couldn't find anything for the 968.

I've got a 1994 968 with 315K on it and deserves to have the cap :)

I've attached pics for reference.

Thanks,

Richard.
You need to be registered and logged in to download files. Registration is free and easy!

#1

Top
User avatar
Silver99
Posts: 16
Joined: Tue May 20, 2025 2:53 am
Has thanked: 1 time
Been thanked: 18 times
Hello, it is not tricky to create a model, but taking in mind it is 12USD from Pelican, is not make much sense... The original part is quite thin, so the 3D print will be pretty fragile, or you have to adjust it to be more robust.
968 Midnight Blue manual coupe
M-B 320SL (R129)
M-B 300CE (C124)

#2

Top
angrymancunian
Posts: 2
Joined: Sat Jan 03, 2026 3:25 am
Has thanked: 1 time
Think this one will do? http://www.thingiverse.com/thing:2537084

#3

Top
User avatar
Silver99
Posts: 16
Joined: Tue May 20, 2025 2:53 am
Has thanked: 1 time
Been thanked: 18 times
angrymancunian wrote: Tue Jan 20, 2026 11:26 am Think this one will do? http://www.thingiverse.com/thing:2537084
No, as you can see from photos, it is a different part.
968 Midnight Blue manual coupe
M-B 320SL (R129)
M-B 300CE (C124)

#4

Top
User avatar
rwodabek
Posts: 2
Joined: Tue Dec 30, 2025 11:06 am
Has thanked: 1 time
Silver99 wrote: Tue Jan 13, 2026 6:41 am Hello, it is not tricky to create a model, but taking in mind it is 12USD from Pelican, is not make much sense... The original part is quite thin, so the 3D print will be pretty fragile, or you have to adjust it to be more robust.
You're right. The part itself is inexpensive and I ended up buying it. I just got into 3D printing and was curious if I could find one and see if it would have worked.

#5

Top
Post Reply