Request for STL File: Porsche 944 Phase 2 Rear Wiper Delete

[LaAudiBidon]

Hi!
I’m looking to find out if anyone has created an STL file for a rear wiper delete on a Porsche 944 Phase 2.
I found this part here: https://partworks.de/partworks/fr/10378 ... XL49k_kHWg , but it’s quite expensive, which is why I’m wondering if a 3D-printable STL file exists.
Thanks in advance for any help!
Greetings from France!

[MetalWolf]

this would be very helpful

[Silver99]

Hello, it's super easy to model it. Just measure the diameter of the hole and the thickness of the glass. I will do it.

[Wardie100]

Here's one I've been using for a while.

It has a o-ring groove (i forget the size o-ring but its 1.5mm chord dia).

It comes out a bit steppy due to having the radius surface, but a bamboo with 'ironing' may improve that (not tested) else some finishing if you so please...

Some flats to help tighten would be nice, but I managed without!

[Silver99]

Here's one I've been using for a while.

It has a o-ring groove (i forget the size o-ring but its 1.5mm chord dia).

It comes out a bit steppy due to having the radius surface, but a bamboo with 'ironing' may improve that (not tested) else some finishing if you so please...

Some flats to help tighten would be nice, but I managed without!

Hello, your part is for a hole diameter 16mm.

2026-01-22 08_51_41-WIPER_BUNG_1_ (Active) - Creo Parametric.png

I created simple one piece plug for 968. The hole diameter is 26mm and glass thickness 4mm. Of course, you need to print it from elastomere. On FDM printers, some TPU, I have access to SLS printer, so I choose transparent material.

2026-01-22 08_57_38-Greenshot.png

You can play with the file in OnShape https://cad.onshape.com/documents/54587 ... fe51194acd