Turbo Oil Seal Vitesse

Talk and Tech about turbocharged 924/944/968 cars
Post Reply
User avatar
333pg333
Posts: 235
Joined: Sat Jul 03, 2021 8:24 pm
Has thanked: 85 times
Been thanked: 48 times
Fast951 wrote: Sat Feb 14, 2026 9:29 am To the OP.

The paper gasket, in your posted picture, is damaged or someone modified it. Examine the shape of the drain hole.
Yes, that looks weird John. As if they're trying to fit a square peg in a round hole??

#11

Top
Dlr944
Posts: 7
Joined: Sun Jan 25, 2026 12:42 pm
Thanks Tom and John. I ordered them off LN Engineering. Different color than pics on-line but same dimensions as old one.
Add Pictures/Files
IMG_2588.jpeg
IMG_2588.jpeg (1.36 MiB) Viewed 141 times

#12

Top
User avatar
Tom
Site Admin
Posts: 8551
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 889 times
Been thanked: 3828 times
Contact:
Contact Tom
How thick are those? The original white ones seemed thicker. I have an original I'll measure if I can find it...

#13

Top
Dlr944
Posts: 7
Joined: Sun Jan 25, 2026 12:42 pm
Roughly 1mm. New one on top… used one on the bottom.
Add Pictures/Files
IMG_2589.jpeg
IMG_2589.jpeg (1.71 MiB) Viewed 131 times

#14

Top
User avatar
Tom
Site Admin
Posts: 8551
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 889 times
Been thanked: 3828 times
Contact:
Contact Tom
Dlr944 wrote: Wed Feb 18, 2026 7:17 pm Roughly 1mm. New one on top… used one on the bottom.
Annoying that they posted a picture of the thicker one and sent you that. Hopefully it still seals fine... Please report back either way, as I'm sure this will come up for others...

#15

Top
Dlr944
Posts: 7
Joined: Sun Jan 25, 2026 12:42 pm
Another one that looks similar to original and measures 2” same center hole to center hole https://www.driftmotion.com/ProductDet ... 0&CartID=1

#16

Top
Post Reply