Page 2 of 2
Re: Turbo Oil Seal Vitesse
Posted: Tue Feb 17, 2026 11:31 pm
by 333pg333
Fast951 wrote: Sat Feb 14, 2026 9:29 am
To the OP.
The paper gasket, in your posted picture, is damaged or someone modified it. Examine the shape of the drain hole.
Yes, that looks weird John. As if they're trying to fit a square peg in a round hole??
Re: Turbo Oil Seal Vitesse
Posted: Wed Feb 18, 2026 5:37 pm
by Dlr944
Thanks Tom and John. I ordered them off LN Engineering. Different color than pics on-line but same dimensions as old one.
Re: Turbo Oil Seal Vitesse
Posted: Wed Feb 18, 2026 6:28 pm
by Tom
How thick are those? The original white ones seemed thicker. I have an original I'll measure if I can find it...
Re: Turbo Oil Seal Vitesse
Posted: Wed Feb 18, 2026 7:17 pm
by Dlr944
Roughly 1mm. New one on top… used one on the bottom.
Re: Turbo Oil Seal Vitesse
Posted: Wed Feb 18, 2026 7:57 pm
by Tom
Dlr944 wrote: Wed Feb 18, 2026 7:17 pm
Roughly 1mm. New one on top… used one on the bottom.
Annoying that they posted a picture of the thicker one and sent you that. Hopefully it still seals fine... Please report back either way, as I'm sure this will come up for others...
Re: Turbo Oil Seal Vitesse
Posted: Wed Feb 18, 2026 8:56 pm
by Dlr944
Another one that looks similar to original and measures 2” same center hole to center hole
https://www.driftmotion.com/ProductDet ... 0&CartID=1