Spyder owners: Anyone bothered by the holes...

[Tom]

Sorry, 1 set of raw aluminum for me - I already cut out the pieces of vinyl using the test piece you sent me. And more interested people will be heading this way soon!

Does the vinyl wrap over and cover the edge?

No, I tried that but it peels up on the rounded corners so I will have to paint the edges Satin Black.

With such a thin piece, my go-to solution would be a black sharpie. I've done that a million times on cars over the years. Haven't gotten many requests in raw aluminum yet, and we'd need to get to ten sets or the price per piece goes way up.

[Bob Z]

Does the vinyl wrap over and cover the edge?

No, I tried that but it peels up on the rounded corners so I will have to paint the edges Satin Black.

With such a thin piece, my go-to solution would be a black sharpie. I've done that a million times on cars over the years. Haven't gotten many requests in raw aluminum yet, and we'd need to get to ten sets or the price per piece goes way up.

I hope we get more that want raw aluminum, which in my opinion will be easier to match the surrounding area, whether one uses vinyl or paint.

[Tom]

No, I tried that but it peels up on the rounded corners so I will have to paint the edges Satin Black.

With such a thin piece, my go-to solution would be a black sharpie. I've done that a million times on cars over the years. Haven't gotten many requests in raw aluminum yet, and we'd need to get to ten sets or the price per piece goes way up.

I hope we get more that want raw aluminum, which in my opinion will be easier to match the surrounding area, whether one uses vinyl or paint.

Understood. The black anodized piece should look at home in that spot, but it's obviously not an exact match for the surrounding area. If it comes to that, you could always paint/wrap the anodized version too, but fingers crossed we get across the line for both types.

[Bob Z]

Thanks Tom. I would suggest to others that they may want to buy 1 of each: anodized and raw.

[CDinMB]

Tom,
I would like a set please. Raw or black is fine.

Carmen

[Bob Z]

If possible Tom, even if you do not get the minimum amount for the raw aluminum ones could you be talked into ordering them anyway? If so I promise to get buyers for them! I am continuing to get more members signed up here that are interested so I am sure they would sell fairly soon.

[Tom]

If possible Tom, even if you do not get the minimum amount for the raw aluminum ones could you be talked into ordering them anyway? If so I promise to get buyers for them! I am continuing to get more members signed up here that are interested so I am sure they would sell fairly soon.

The raw ones would be bead blasted for a uniform surface. If needed, I could always bead blast a black set myself for those who really want raw aluminum -- if only 2 or 3 people want them. Would take 10 minutes in my blast cabinet. To help speed it along, it would help if everyone tried to get the word our wherever Spyder folks hang-out online (rules permitting of course). I'll order more than the minimum I posted anyway, to get the price down, so the minimums I picked already represented a small roll of the dice on my part... One way or another, I'm sure I can get you a raw set, but want to give it a few days before ordering to get a bit more critical mass going, and to gauge how far out on a limb I should go....

[Bob Z]

Roger that Tom, we can give it as long as you like to make sure everyone that wants one will get it!

[RainerH]

Hello together,
new here and got the Info from Bob in Rennlist.
I'm interessted in 2 pairs in black and shipment to Germany.
Thank you very much in advance.
Cheers
Rainer

[bosha1987]

Hello Everybody!

I'm new here. Coming from rennlist as well by Bob's suggestion.

I'm interested in a couple of pairs to be shipped to Italy.

Let me know if I have to send an email with a formal request.

Best regards
Matteo