Spyder owners: Anyone bothered by the holes...

Including the Spyder, GT4, and GT4RS
GIN
Posts: 8
Joined: Tue Jan 10, 2023 3:50 pm
Has thanked: 14 times
Been thanked: 2 times
I am interested in a set of anodized and a set of raw covers.

Thanks for your efforts on this. Now that I have seen the holes I cannot un-see them. Also don’t want the spots people are talking about on the red cover.

Additionally, wanted to let you know that I found this forum thru Edguard. He placed a card in the shipment of my bolster covers. Not sure I would have found this forum or this thread other wise.

#151

User avatar
Tom
Site Admin
Posts: 8575
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 891 times
Been thanked: 3854 times
Contact:
GIN wrote: Tue Jan 10, 2023 4:04 pm I am interested in a set of anodized and a set of raw covers.

Thanks for your efforts on this. Now that I have seen the holes I cannot un-see them. Also don’t want the spots people are talking about on the red cover.

Additionally, wanted to let you know that I found this forum thru Edguard. He placed a card in the shipment of my bolster covers. Not sure I would have found this forum or this thread other wise.
Welcome to Carpokes!

I'll put you on the list for the hole covers and will be ordering them as soon as we reach critical mass. If you know of anyone else who might want them, please help spread the word!

@Crazy Eddie is a good friend and even has his own "corner" here on Carpokes. Now that he's an international sensation, however, catching a glimpse of him here is like seeing Bruce Springsteen at the airport. But I can usually coax him into answering questions here with offers to use my 4-post lift, free candy, etc. :lol: 8-) :angel:

#152

Crazy Eddie
Posts: 199
Joined: Wed Jun 30, 2021 5:33 pm
Has thanked: 210 times
Been thanked: 78 times
GIN wrote: Tue Jan 10, 2023 4:04 pm I am interested in a set of anodized and a set of raw covers.

Thanks for your efforts on this. Now that I have seen the holes I cannot un-see them. Also don’t want the spots people are talking about on the red cover.

Additionally, wanted to let you know that I found this forum thru Edguard. He placed a card in the shipment of my bolster covers. Not sure I would have found this forum or this thread other wise.
Welcome
:thumbup:
Best
Ed

#153

m3drivers
Posts: 3
Joined: Wed Jan 11, 2023 4:02 pm
Hi - I am in for a pair of raw aluminum covers. And, thanks for taking this on.

I do feel like a matte black vinyl wrap perhaps in combination with enough heat activation and a ring of glue on the back of the cover might suffice to make a decent match to the surrounding matte black plastic.

Nod to Bob Z. for referring me over from Rennlist 👍🏻

m3drivers

#154

User avatar
Tom
Site Admin
Posts: 8575
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 891 times
Been thanked: 3854 times
Contact:
So far: 12 sets Black and 5 Raw (including CDinMB); In addition, need to hear from TheBeav and bosha1987 on which type they want. Would be nice to get a few more folks who want the Raw ones, but getting close. If anyone has changed their mind, please let me know. I'll come up with logistics soon and let you know how we'll handle payment/shipping, etc.

@cybers3c -- 1 set in Black
@Spyder Scott - 4 sets in Black
@TheBeav -- do you want Black or Raw?
@Potterjwp --1 set in Black
@Der Tgr -- 1 set Black
@Bob Z -- 1 set Raw
@Pigs-In-Space --1 set in Black
@808c2s -- 1 set Black, 1 set Raw
@CDinMB 1 set in either Black or Raw
@RainerH 2 Black sets to Germany
@bosha1987 2 Sets to Italy -- do you want raw or black sets?
@GIN 1 set Raw and 1 Black set
@m3drivers 1 set Raw

#155

User avatar
Bob Z
Posts: 366
Joined: Mon Jul 19, 2021 6:46 pm
Been thanked: 112 times
Let's give it to at least Monday, Tom, and I will see if I can more people to order some.
__________________
Drive safe, but fast.

#156

GIN
Posts: 8
Joined: Tue Jan 10, 2023 3:50 pm
Has thanked: 14 times
Been thanked: 2 times
Thanks again. Just to clarify I would like a raw set and an anodized set. The prior list just had me down for a raw set.

#157

User avatar
Tom
Site Admin
Posts: 8575
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 891 times
Been thanked: 3854 times
Contact:
GIN wrote: Wed Jan 11, 2023 7:38 pm Thanks again. Just to clarify I would like a raw set and an anodized set. The prior list just had me down for a raw set.
fixed, thanks!

#158

User avatar
bosha1987
Posts: 11
Joined: Mon Jan 09, 2023 3:15 am
Location: PADOVA
Been thanked: 6 times
Tom wrote: Wed Jan 11, 2023 6:42 pm So far: 12 sets Black and 5 Raw (including CDinMB); In addition, need to hear from TheBeav and bosha1987 on which type they want. Would be nice to get a few more folks who want the Raw ones, but getting close. If anyone has changed their mind, please let me know. I'll come up with logistics soon and let you know how we'll handle payment/shipping, etc.

@cybers3c -- 1 set in Black
@Spyder Scott - 4 sets in Black
@TheBeav -- do you want Black or Raw?
@Potterjwp --1 set in Black
@Der Tgr -- 1 set Black
@Bob Z -- 1 set Raw
@Pigs-In-Space --1 set in Black
@808c2s -- 1 set Black, 1 set Raw
@CDinMB 1 set in either Black or Raw
@RainerH 2 Black sets to Germany
@bosha1987 2 Sets to Italy -- do you want raw or black sets?
@GIN 1 set Raw and 1 Black set
@m3drivers 1 set Raw

Hello TOM

For me 2 sets BLACK please

thanks

#159

Genki_Ken
Posts: 1
Joined: Thu Jan 12, 2023 8:22 am
Tom wrote: Wed Jan 11, 2023 7:50 pm
GIN wrote: Wed Jan 11, 2023 7:38 pm Thanks again. Just to clarify I would like a raw set and an anodized set. The prior list just had me down for a raw set.
fixed, thanks!
Hi Tom,

I would like a black pair. How can I order with you guys?

Thanks,
Ken

#160

Post Reply