Page 22 of 26
Re: Waitlist for 911-style Gauge Bezels
Posted: Tue Aug 27, 2024 2:09 pm
by blueline
Tom's last post regarding price was March 7th on page 17 of this thread. Here's the link to that post:
https://www.carpokes.com/viewtopic.php? ... 150#p31176
There are a number of pics and good feedback all the way through the thread, but especially from that post until now I think.
Tom's email address is there too so can contact him to find updated info, availability, price, etc.
Re: Waitlist for 911-style Gauge Bezels
Posted: Tue Aug 27, 2024 6:16 pm
by Tom
blueline wrote: Tue Aug 27, 2024 2:09 pm
Tom's last post regarding price was March 7th on page 17 of this thread. Here's the link to that post:
https://www.carpokes.com/viewtopic.php? ... 150#p31176
There are a number of pics and good feedback all the way through the thread, but especially from that post until now I think.
Tom's email address is there too so can contact him to find updated info, availability, price, etc.
Thanks Tim! I have not changed the price since the original offer, but the bigger issue has been finding the time to make these. I make them in little batches and reach out to people who have posted here. I keep churning them out, slowly, but it has been taking me an embarrassingly long time to work through the list....

Re: Waitlist for 911-style Gauge Bezels
Posted: Tue Sep 03, 2024 11:21 am
by JamesM
Put me on the list please, I was able to see @pestilence68 07k swap with his dash at 944 fest and they looked great
Re: Waitlist for 911-style Gauge Bezels
Posted: Tue Sep 24, 2024 7:17 pm
by Tom
I pulled together 3 complete kits and have them ready to ship. If I emailed you in the past promising you a kit, let me know so I can give you priority. These are the full kits with the low reflection lenses and fully adjustable LED lighting. $250 per kit, plus shipping. Email me at
admin@carpokes.com if you'd like a kit. Cheers!

- 911-gauge-set.jpg (2.6 MiB) Viewed 3631 times
Re: Waitlist for 911-style Gauge Bezels
Posted: Thu Sep 26, 2024 12:09 pm
by Tom
All three of these sets are sold. I'll post again, hopefully sooner rather than later, when more are available.

Re: Waitlist for 911-style Gauge Bezels
Posted: Fri Sep 27, 2024 1:39 pm
by quest
Is there a waitlist to be notified when the next ones are ready for sale?
Re: Waitlist for 911-style Gauge Bezels
Posted: Fri Sep 27, 2024 2:29 pm
by Tom
I am working on another batch of three now. Will take about a week. (They take a LOT of printing and assembly time!) This is the waitlist, and I post them here before including in the email newsletter, etc. So if you keep your eyes on this thread, you'll be the first to know. I do hope to start churning them out more regularly going forward.
Re: Waitlist for 911-style Gauge Bezels
Posted: Sat Oct 19, 2024 11:18 am
by Tom
Hi All, I have a new batch of these ready to go. Just finishing up the lenses now. Email me at
admin@carpokes.com if interested.
Kit's are $250 with the fancy lenses, LED kit, etc. (everything needed to install), plus $10 shipping to the 50 states.

Re: Waitlist for 911-style Gauge Bezels
Posted: Mon Oct 21, 2024 3:00 pm
by Luke
Hey Tom, I assume these current kits are still only LHD compatible?
I'm very much interested in a RHD compatible kit without LEDs

Re: Waitlist for 911-style Gauge Bezels
Posted: Mon Oct 21, 2024 3:15 pm
by Tom
Luke wrote: Mon Oct 21, 2024 3:00 pm
Hey Tom, I assume these current kits are still only LHD compatible?
I'm very much interested in a RHD compatible kit without LEDs
All the kits I had over the weekend are already sold, but I just ordered more museum glass (acrylic) for another dozen kits, and have already started printing the next batch. Stay tuned. The museum glass went up quite a bit, so I will need to bump the price of the kit by $10-$20 to cover that. I love the LED kit and think it's a huge part of the kit. That said, without the LED kit, I'm not sure there would be any difference between a LHD car and a RHD car? Would you have any pictures of the cluster in the dash without the big vent surround installed? Only thing I can think of is that you'd be missing the side panel that normally holds the LED circuit board, which also closes off a little gap in the dash that's created when you remove the original clear front. If you have a picture, I can probably tell if it would work just to print the mirror image of that existing part.