ArnnWorx
-
idealcheese
- Posts: 11
- Joined: Tue Nov 14, 2023 12:08 pm
@Tom Thanks so much for the explanation!
-
Itneedseverything
- Posts: 10
- Joined: Mon Jul 01, 2024 12:23 pm
Received the kit tom. Thanks again!
Does anyone know what the arnnworx underbody hardware kit consisted off? I remember that I’m the kit had lots of improvements made to make the underbody panels easier to install and secure and remove.
-
Tom
- Site Admin
- Posts: 8581
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 893 times
- Been thanked: 3854 times
- Contact:
Bruce sent me a lot of his files. I'll take a look and see if there's anything about that kit. You might also check the wayback machine to see if there's anything were any good pics/info on his site...MoeMonney wrote: Sat Nov 15, 2025 4:57 am Does anyone know what the arnnworx underbody hardware kit consisted off? I remember that I’m the kit had lots of improvements made to make the underbody panels easier to install and secure and remove.
This is what I found, maybe we can replicate this kit!
Description
Fits all 944 Turbo & S2
This 63 piece kit includes all the fasteners and hardware to attach the batwing and plastic bellypan to your Porsche 944 Turbo or S2. Some of these parts are OEM but most are replacement parts that just work better! Unlike the original hardware, our screws and nylocks have integrated washers so you don't fumble the washer will laying upside down trying to hold the panel in place. Our angle brackets are zinc coated for corrosion protection and long life. You don't want to know what all this hardware costs from Porsche! Our kit is nicer and less expensive.
Description
Fits all 944 Turbo & S2
This 63 piece kit includes all the fasteners and hardware to attach the batwing and plastic bellypan to your Porsche 944 Turbo or S2. Some of these parts are OEM but most are replacement parts that just work better! Unlike the original hardware, our screws and nylocks have integrated washers so you don't fumble the washer will laying upside down trying to hold the panel in place. Our angle brackets are zinc coated for corrosion protection and long life. You don't want to know what all this hardware costs from Porsche! Our kit is nicer and less expensive.
- Add Pictures/Files
-
- IMG_7072.jpeg (167.85 KiB) Viewed 712 times
-
- IMG_7071.jpeg (133.25 KiB) Viewed 712 times
-
- IMG_7070.jpeg (61.06 KiB) Viewed 712 times
-
- IMG_7069.jpeg (77.44 KiB) Viewed 712 times
-
- IMG_7067.jpeg (103.41 KiB) Viewed 712 times
-
- IMG_7066.jpeg (82.79 KiB) Viewed 712 times
-
Gaspowered
- Posts: 148
- Joined: Sat Jan 11, 2025 4:27 pm
- Location: OK
- Has thanked: 276 times
- Been thanked: 78 times
I haven't compared them head-to head, but 944Online has what appears to be a very similar kit.
https://944online.com/front-lower-spoil ... 944s2-968/
Cheers
https://944online.com/front-lower-spoil ... 944s2-968/
Cheers
Brian
'88 944 Turbo S / Silber Rosa
'88 944 Turbo S / Silber Rosa
Only problem is it's been sold out for ages. Paragon Products used to sell the Arnnworx kit, but I guess they have no plans to reintroduce it, their webpage still lists it but it wasn't available last time I emailed them a couple of years ago.
I really think there is a market for re-creating Bruce's kit, also here across the big pond.
I really think there is a market for re-creating Bruce's kit, also here across the big pond.
944 NA ROW -86
-
Tom
- Site Admin
- Posts: 8581
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 893 times
- Been thanked: 3854 times
- Contact:
Sounds like a job for carpokes. 