Carpokes

Posted: **Wed Aug 17, 2022 10:05 am**

Holy Cow, looks like I'll need to fire up the 3D printer for the new GT3RS....

: mode dial madness.jpg (81.75 KiB) Viewed 1671 times

Posted: **Wed Aug 17, 2022 3:11 pm**

Tom wrote: Wed Aug 17, 2022 10:05 am Holy Cow, looks like I'll need to fire up the 3D printer for the new GT3RS....

mode dial madness.jpg

Lol, looks like they ran out of options to assign the buttons and dial modes

Posted: **Wed Aug 17, 2022 4:45 pm**

Tom wrote: Wed Aug 17, 2022 10:05 am Holy Cow, looks like I'll need to fire up the 3D printer for the new GT3RS....

mode dial madness.jpg

Red, blue, yellow and black

Posted: **Wed Aug 17, 2022 4:47 pm**

andy blue wrote: Wed Aug 17, 2022 7:42 am Tested a 992 bezel cover and is too small for 991.2 bezel........fyi bezel cover fans;))

@andy blue Check with Tom but I think the 991.2 drive mode knob is the same as the 718. The covers are interchangeable?

Posted: **Wed Aug 17, 2022 5:06 pm**

Larry C wrote: Wed Aug 17, 2022 4:47 pm
andy blue wrote: Wed Aug 17, 2022 7:42 am Tested a 992 bezel cover and is too small for 991.2 bezel........fyi bezel cover fans;))
@andy blue Check with Tom but I think the 991.2 drive mode knob is the same as the 718. The covers are interchangeable?

Andy was trying the 992 sport chrono bezel on his 991.2 -- in the pictures, they looked very similar. But not close enough it seems.

Posted: **Wed Aug 17, 2022 5:42 pm**

Tom wrote: Wed Aug 17, 2022 10:05 am Holy Cow, looks like I'll need to fire up the 3D printer for the new GT3RS....

mode dial madness.jpg

At first I thought it was a joke. Then I realized it was real and was like... what?? this looks awful.

Then I saw the launch video and I soooo want it.

Porsche did it again!

Posted: **Thu Aug 18, 2022 7:38 pm**

Acropora wrote: Tue Aug 16, 2022 7:02 pm
elm310 wrote: Tue Aug 16, 2022 6:34 pm I'm finally posting pictures of the bezel, pinwheel and sport chrono covers that @Tom made for my car. Shark Blue and matches perfectly. Thank you Tom. I am super happy.

Eric
Looking good Eric, I see you got the deviated stitching in blue as well, nice touch.
Question for you, see how the GTS logo in the tach it’s lit, does it stay lit when the car is running? The reason I’m asking on mine the logo is almost off the except the letter G is half lit and it fades off and on, wondering if my cluster is bad

@Acropora so I got to look again while my car was on, the GTS on the tack is not lit up.

Eric

Posted: **Fri Aug 19, 2022 3:18 am**

elm310 wrote: Thu Aug 18, 2022 7:38 pm
Acropora wrote: Tue Aug 16, 2022 7:02 pm
elm310 wrote: Tue Aug 16, 2022 6:34 pm I'm finally posting pictures of the bezel, pinwheel and sport chrono covers that @Tom made for my car. Shark Blue and matches perfectly. Thank you Tom. I am super happy.

Eric
Looking good Eric, I see you got the deviated stitching in blue as well, nice touch.
Question for you, see how the GTS logo in the tach it’s lit, does it stay lit when the car is running? The reason I’m asking on mine the logo is almost off the except the letter G is half lit and it fades off and on, wondering if my cluster is bad
@Acropora so I got to look again while my car was on, the GTS on the tack is not lit up.

Eric

Thank you Eric

makes me feel much better knowing there is no issue , I appreciate it

Posted: **Fri Aug 19, 2022 6:14 am**

The “GTS” in the tach is not lit up for me as well.

Posted: **Fri Aug 19, 2022 7:51 am**

rarceo wrote: Fri Aug 19, 2022 6:14 am The “GTS” in the tach is not lit up for me as well.

Thanks bud, I can swear mine use to lite up while I was driving

Carpokes

992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....

Re: 992 and Taycan Bezel Wait List....