Carpokes

I haven’t had a 944 since 1993 but that doesn’t mean I still don’t pine for one! Anyways I was wondering if the community is in need of caliper rebuild kits? Currently I am importing brake parts from Frenkit Spain and they have rebuild kits for the following 944’s

2.5
2.7
2.5S
2.5 Turbo
3.0 S2

I can get individual pistons, rebuild kits, and pistons + rebuild kits together. If there is a desire for these rebuild kits I can put in an order. (928’s also)

Obligatory pic of my former 944 Mike

I would be interested in a rebuild kit for an early 944 turbo . Rears were shot but still have them for a future rebuild

Maruscmn wrote: Mon Jun 10, 2024 1:21 pm I haven’t had a 944 since 1993 but that doesn’t mean I still don’t pine for one! Anyways I was wondering if the community is in need of caliper rebuild kits? Currently I am importing brake parts from Frenkit Spain and they have rebuild kits for the following 944’s

2.5
2.7
2.5S
2.5 Turbo
3.0 S2

I can get individual pistons, rebuild kits, and pistons + rebuild kits together. If there is a desire for these rebuild kits I can put in an order. (928’s also)

Obligatory pic of my former 944
DocImage000000528.jpeg

Mike

There is a market, although not big.
Bigger market is for n/a calipers.
I rebuilt my turbo calipers (2 sets) with the kits from 944online. I had ordered from Spain and UK before as Ian did not have pistons.
Sadly working with overseas is a pita, as there are 4 different piston sizes for turbo/S2, and getting people to correctly measure them is an endeavor (unless the calipers are off the car and disassembled), people try or want to go by vin or car model /options (I know I did) and that only works 1/2 the time as our cars have been modified, frankensteined, etc.. ROW cars mostly have regular seals while most US spec have the scraper type.
Just my humble opinion.
Kuddos on trying to help.
Joaquin

wrote: There is a market, although not big.
Bigger market is for n/a calipers.
I rebuilt my turbo calipers (2 sets) with the kits from 944online. I had ordered from Spain and UK before as Ian did not have pistons.
Sadly working with overseas is a pita, as there are 4 different piston sizes for turbo/S2, and getting people to correctly measure them is an endeavor (unless the calipers are off the car and disassembled), people try or want to go by vin or car model /options (I know I did) and that only works 1/2 the time as our cars have been modified, frankensteined, etc.. ROW cars mostly have regular seals while most US spec have the scraper type.
Just my humble opinion.
Kuddos on trying to help.
Joaquin

Porsche is by far the worst when it comes to mixing caliper so on multiple cars! This is what we have just for the 944!

Stroke Position Make Notes
2.5 Turbo. Front Brembo ->86
2.5 Turbo. Front Brembo -> 88
3.0 S2. Front Brembo ...->94KN4 02629
2.5 Turbo. Front Brembo
3.0 S2 Front Brembo
2.5 Front ATE (Teves) 84 ->
2.7 Front ATE (Teves)
2.5 Front ATE (Teves) -> 83
2.5 Turbo Front Brembo 87 ->
2.5 Turbo Rear Brembo ...-> 95KN1 00218
2.5 Turbo Rear Brembo
3.0 S2 Rear Brembo
2.5 Turbo Rear Brembo ...-> 95KN1 00218
2.5 Rear ATE (Teves)
2.7 Rear ATE (Teves)
2.5 S Rear ATE (Teves)

Ive contacted Emanuel (944store) as we used to supply them rebuild kits. Since we have helped Frenkit start their performance line division, I don't have to deal with a middle man anymore

Mike