Fan control knob
Posted: Mon Jan 05, 2026 10:01 pm
Here is my fan control knob design, it is based on the knob from thingiverse.com/thing:2704579/
This original design needed some corrections in terms of side and slot location, plus some additional details.
See some images after install: Files:
The two files are of different recess levels.
I painted the center by hand, but you can also print in multiple colors.
My print was using ASA from Qidi-Q2 with ironing.
This original design needed some corrections in terms of side and slot location, plus some additional details.
See some images after install: Files:
The two files are of different recess levels.
I painted the center by hand, but you can also print in multiple colors.
My print was using ASA from Qidi-Q2 with ironing.