Page 12 of 12
Re: new project
Posted: Wed Feb 19, 2025 8:17 am
by gruhsy
https://dealers.linkecu.com/G4X-FuryX
Are you running the LS 4.9 wideband?
If so are the differences from 4.2 any benefit?
Only read a bit online about 4.9 and forgotten what I read other than the basic function of how they monitor A/F
Re: new project
Posted: Wed Feb 19, 2025 8:21 am
by chris white
gruhsy wrote: Wed Feb 19, 2025 8:17 am
https://dealers.linkecu.com/G4X-FuryX
Are you running the LS 4.9 wideband?
If so are the differences from 4.2 any benefit?
Only read a bit online about 4.9 and forgotten what I read other than the basic function of how they monitor A/F
Yes, did not I see a major difference...no. both seem to work well. the 4.2 probably had more issues with older high mile engines
heres the technical answer
https://ecotrons.com/accurate_lambda_me ... 2_sensors/
Re: new project
Posted: Wed Feb 19, 2025 8:29 am
by chris white
Re: new project
Posted: Wed Feb 19, 2025 8:32 am
by NCGermerican
Re: new project
Posted: Wed Feb 19, 2025 1:12 pm
by 333pg333
Nice cars...all of them.
Re: new project
Posted: Wed Feb 19, 2025 1:14 pm
by 333pg333
chris white wrote: Wed Feb 19, 2025 7:16 am
333pg333 wrote: Tue Feb 18, 2025 2:03 pm
chris white wrote: Tue Feb 11, 2025 10:59 am
Based on the input I think we have narrowed it down to one of the following design ideas:
Screenshot 2025-02-11 135438.jpgScreenshot 2025-02-11 135407.jpgScreenshot 2025-02-11 135312.jpg
Then I think I've found the interior for you.
i want it in avacado green!
Please form an orderly queue.
Re: new project
Posted: Thu Feb 20, 2025 10:32 pm
by j1nx3d
Chris, not sure if you're tracking this RL thread on updated lighting?
https://rennlist.com/forums/924-931-944 ... eloading=1
Re: new project
Posted: Fri Feb 21, 2025 6:44 am
by chris white
Yes, that was started by the ‘Ultimate 944 project’ originator. We have been working on all sorts of things. Complete new tail lights are being designed to go with the new rear design. The whole idea is snowballing in the right direction – new control arms, making our own wheels, possibly our own intake manifold. Once in a lifetime project to make the best possible.
Already ordered the pistons / rods and sent out the cranks. Base engine is a 2.7 and the ‘S’ engine is a 3.2
Re: new project
Posted: Fri Feb 21, 2025 11:05 am
by Tom