Page 4 of 29
Re: 718 Solid ABS License Plate Mounts
Posted: Tue Sep 07, 2021 9:07 am
by Need4Spd
Tom wrote: Sat Sep 04, 2021 6:51 pm
Chulander -- Awesome! Thank you for posting! Looking great on your car! No need to let it sit overnight, but no harm either....
Need4Spd -- I could 3D print you a set now, or in the next month or so, we should have a CNC'd version that fits both the 991 and 991.... Your choice!
lougin -- not sure I ever did mounts for the 981, though I seem to recall folks using the 991 version. If you wanted to take a picture of where your license plate mounts, I can probably tell you what would/wouldn't work....
Hi, Tom! I’m not in any hurry. Just let me know when the CNC’d version is ready! My car is a 991.1 turbo.
Re: 718 Solid ABS License Plate Mounts
Posted: Tue Sep 07, 2021 9:34 am
by Tom
Need4Spd wrote: Tue Sep 07, 2021 9:07 am
Tom wrote: Sat Sep 04, 2021 6:51 pm
Chulander -- Awesome! Thank you for posting! Looking great on your car! No need to let it sit overnight, but no harm either....
Need4Spd -- I could 3D print you a set now, or in the next month or so, we should have a CNC'd version that fits both the 991 and 991.... Your choice!
lougin -- not sure I ever did mounts for the 981, though I seem to recall folks using the 991 version. If you wanted to take a picture of where your license plate mounts, I can probably tell you what would/wouldn't work....
Hi, Tom! I’m not in any hurry. Just let me know when the CNC’d version is ready! My car is a 991.1 turbo.
Will do, and keep your eyes open here -- I'll start a new thread when they are ready. My hope is to do a mount that fit the 981, 991.1 and.2, and the 992 (including new GT3). Those cars all have the raised ridge/outline, requiring relief grooves in the mount. I'll get those going as soon as I have enough of the 718 mounts to keep up for a while -- by the end of the month I hope.
Re: 718 Solid ABS License Plate Mounts
Posted: Tue Sep 07, 2021 8:08 pm
by wistful
oooo... these look nice!
Re: 718 Solid ABS License Plate Mounts
Posted: Wed Sep 08, 2021 8:08 am
by Tom
wistful wrote: Tue Sep 07, 2021 8:08 pm
oooo... these look nice!
They are popular here on Carpokes. If you want a set, let me know.
Re: 718 Solid ABS License Plate Mounts
Posted: Fri Sep 10, 2021 3:31 pm
by Stigs cousin
Those Lic.plate mounts look really nice!CNC'ed ones look better then the 3 -D printed ones.No offense Tom!
Re: 718 Solid ABS License Plate Mounts
Posted: Sun Sep 12, 2021 7:48 pm
by TPatt
Hi Tom,
New Porsche Cayman owner here, I'm coming over from 718forum. There was a post about these there.
I'll be ordering soon.
Re: 718 Solid ABS License Plate Mounts
Posted: Sun Sep 12, 2021 11:02 pm
by larry
Hey Tom,
New user here, I was referred by Mitch on our little Seattle 912 group. I’ll be ordering a set of these for my Gentian Blue GT4 as soon as I hit the post count.
Thanks!
Re: 718 Solid ABS License Plate Mounts
Posted: Mon Sep 13, 2021 1:18 am
by 808c2s
larry wrote: Sun Sep 12, 2021 11:02 pm
Hey Tom,
New user here, I was referred by Mitch on our little Seattle 912 group. I’ll be ordering a set of these for my Gentian Blue GT4 as soon as I hit the post count.
Thanks!
You can just email him:
admin@carpokes.com
Re: 718 Solid ABS License Plate Mounts
Posted: Tue Sep 14, 2021 4:34 pm
by OT-Dan
Another happy customer, the mounts are great! So satisfying to tighten machined screws instead of going through the plastic bumper. Great service by Tom as well.
Re: 718 Solid ABS License Plate Mounts
Posted: Wed Sep 15, 2021 6:24 am
by AdamIsAdam
Hey
@Tom and others. Yes, I'm here! Taa-daa! (from Renn). My CGTS4.0 is on order so I MUST start collecting parts for it. I didn't realize the dealer has to make holes in the rear bumper too in order to mount plates! I don't know of any other car, EVER, that didn't have some sort of a nut mounted for the rear plate.
SO I NEED THIS! ASAP! Because my car will be here on 12/31 (if I'm lucky).
I'll email you, Tom, since I read that I can't PM for a few posts yet.
Thanks again.
Adam